10/100Base Dual Fiber Media Converter

10/100base dual fiber media converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. The 10/100base dual fiber media converters are with reasonable price are especially designed for network users.
 
10/100base dual fiber media converters main features
1. Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full
Duplex or Half Duplex.
2. UTP port supports MDI / MDI-X auto crossover.
3. Multiple optical interfaces to be chosen: SC, ST or FC, single mode / multimode
4. Supporting 1552 Byte packet
5. Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
6. Design of internal or external power supply for selection by users
 
certified fiber optic technician jobs
10/100base dual fiber media converter Technical Specifications
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
* MAC address table: 1K
* Connector: UTP: RJ-45 10/100Mbps; Fiber: ST/SC/FC 100Mbps
* Cable:
UTP: Cat. 5 UTP (the max distance up to 100m)
Fiber (Multimode): 50/125, 62. 5/125μm (the max distance up to 2km or 5km)
Fiber (Single mode): 8. 3/125, 8. 7/125, 9/125, 10/125μm (the max distance up to 20 -120km)
* Flow Control
Full Duplex: Supporting standard IEEE802. 3x
Half Duplex: Back pressure
* LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
* Power: AC 90 ~ 240V; DC 5V.1A
* Ambient Temperature: 0 ~ 70º C
* Humidity: 5 ~ 90%

10Gigabit OM3 Aqua 50/125 Multimode ST to ST Fiber Optic Patch Cable

We supply the ST to ST 10Gigabit OM3 multimode fiber optic cable that can transmit 10G signal. Huihong Tech's 10Gig fiber optic patch cables are designed to meet this requirement ,these ST-ST 10g duplex fiber optic patch cords are with aqua OM3 50/125 fiber glass and they are typically used in 10 Gigabit Ethernet,
fiber optic certified

10gigabit fiber optic patch cables the bandwidth supported is as specified IEEE802.3z which is for gigbit ethernet. Huihong Tech duplex10gig fiber optic patch cords are manufactured according to TIA-492AAAC-A standard for OM3 cable ,and the typical cable color is as per aqua standard which was developed by Lucent technologies

ST to ST 10Gig OM3 Multimode duplex fiber optic patch cable features:
Support 10 Gigabit data transmitting rates
Connectors are with UPC polish
Ceramic ferrules provide alignment
OM3 50/125 fiber optic glass

10Gigabit OM3 Aqua 50/125 Multimode SC to SC Fiber Optic Patch Cable

We supply the SC to SC 10Gigabit OM3 multimode fiber optic cable that can transmit 10G signal. Huihong Tech's 10Gig fiber optic patch cables are designed to meet this requirement ,these SC-SC 10g duplex fiber optic patch cords are with aqua OM3 50/125

optic cable installers
fiber glass and they are typically used in 10 Gigabit Ethernet,our 10gigabit fiber optic patch cables the bandwidth supported is as specified IEEE802.3z which is for gigbit ethernet. Huihong Tech duplex10gig fiber optic patch cords are manufactured according to TIA-492AAAC-A standard for OM3 cable ,and the typical cable color is as per aqua standard which was developed by Lucent technologies

SC to SC 10Gig OM3 Multimode duplex fiber optic patch cable features:
Support 10 Gigabit data transmitting rates
Connectors are with UPC polish
Ceramic ferrules provide alignment
OM3 50/125 fiber optic glass
Used to connect patch panels and/or network devices that require 50/125 multimode cable.
Fully compliant with international industry standard
Fulfill high bandwidth needs

Output optical power: more than-12dBm

Data Performance
Data Rate DC to 115 kbs (RS-232, RS-422; RS-485)
Bit Error Rate 10-9

Indicators
Video Data ERR Presence LED
Video Data SYNC Presence LED
Power PWR Presence LEDs
fiber optic engineer salary
Optical interface
Bit Rate Over Fiber: 1.25Gbps
Output optical power: more than-12dBm
Wavelength T to R:1310nm
Wavelength R to T:1550nm
Receiver style: PINFET
Receiving sensitivity: less than -22 dBm
Light linker style: FC ST
Transmission distance: up to 80km

Ethernet interface (optional)
Standard: comply with IEEE802.3 standard
Data rate:100Mbps
Interface rate:10-100Mbps auto-negotiation
Interface mode: Half-full duplex auto-negotiation
Interface connector:RJ45

16 channel optical video transmitter and receiver

Power supply
Requirements Voltage:DC5V1A
Source: Power Supply or Chassis Backplane
Power consumption: less than 10W

Environment
Working temperature: -20°C-+70°C
Storage temperature: -40°C~+80°C
Relative humidity: 5%~95 %
fiber optics jobs

16 channel optical video receiver
 16 channel optical video receiver

16 channel optical video transmitter and receiver pdf

The 16 channel optical video receiver accepts 16 composite video baseband signals via video BNC ports. It then performs a 10-bit linear analog-to-digital conversion on the baseband video signals, multiplexes the resulting PCM data, transmits the data optically via an optical fiber to the de-multiplexer.

We are China manufacturer and China supplier of the digita

We are China manufacturer and China supplier of the digital video optical transmitters and receivers


2 channel fiber optic video transceiver
 2 channel fiber optic video transceiver

2 channel fiber optic video transceiver pdf

The 2 channel fiber optic video transceiver accepts 2 composite video baseband signals via video BNC ports. It then performs a 10-bit linear analog-to-digital conversion on the baseband video signals, multiplexes the resulting PCM data, transmits the data optically via an optical fiber to the de-multiplexer(receiver).
certified fiber optic technician jobs
The composite digital video transmitted from the 2 channel fiber-optic video transceivers unit, is received and demultiplexed by the de-multiplexer(receiver), which is responsible for routing the video data to digital-to-analog converters for output via the four video output BNC port. The 2 channel fiber-optic video transceivers are stand-alone unit types and slot card types that is rack-mountable to fit in the chassis.

channel fiber optic video multiplexer Feature:

1 channel fiber optic video multiplexer Feature:
10 Bit Digitally Encoded Transmission
One and Two fiber versions available
NTSC, PAL, SECAM Compatible
Surface Mount Technology
BNC I/O Video Connector
8 PIN Terminal Block Data Connector
ST, FC Optical Connector
Video, DIP selectable PTZ Data Manchester/Biphase, RS-232, RS-422, RS-485 (2 & 4 wire)
DIP Switch Activation of Termination Resistors
Up to 4km/2.5mi on multimode; 56km/35mi on single mode
fiber optic certified
1 channel fiber optic video multiplexer Specifications：
Video Performance
Video Format: NTSC, PAL, SECAM
Video In/Output Impedance 75 Ohm (unbalanced)
Video In/Output Voltage 1.0V p-p typ, 1.5V max
Frequency Response 5Hz to 6.5MHz
Differential Gain (10-90% APL) < 0.7% typ
Differential Phase (10-90% APL) < 0.7° typ
Signal to Noise Ratio > 67dB (weighted)
Encoding 10 Bit linear PCM
Sampling Rate:16MHz